Festool T 12+3 Original Operating Manual page 14

GB
T 12+3, T 15+3, T 18+3
** The maximum speed is reduced in the lower torque stages.
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times forr
Permitted charging temperature range
Temperature monitoring
Battery packs for
Order number
Voltage
Capacity
Weight
Order number
Voltage
Capacity
Weight
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
14
LiIon 1,3 Ah/ 2,6 Ah, 80 %
LiIon 1,3 Ah/ 2.6 Ah, 100 %
NiCd 1,3 Ah/ 2,4 Ah
NiMH 2,0 Ah/ 3,0 Ah
T 12+3
BPC 12 Li
LiIon
497952
10.8 V
2.6 Ah
0.5 kg
BPS 12 C
NiMH
491825
12 V
2.0 Ah
0.6 kg
may make exposed metal parts of the
power tool "live" and could give the opera-
tor an electric shock.
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger
used.Children should always be super-
vised to ensure that they do not play with
the charger or the power tools.
– Switch of the power tool immediately
if the tool is blocked. Always be pre-
TRC 3
approx. 22/ 45 min
approx. 35/ 70 min
approx. 25/ 50 min
approx. 50/ 70 min
T 15+3
BPC 15 Li
LiIon
497020
14.4 V
2.6 Ah
0.6 kg
BPS 15,6 S
NiMH
491823
15.6 V
3.0 Ah
0.9 kg
or power tool
220 - 240 V ~
50/60 Hz
7,2 - 18 V=
max. 3 A
approx. 0,06 A
-5 °C to +45 °C
via NTC resistor
T 18+3
BPC 18 Li
LiIon
497253
18 V
2.6 Ah
0.7 kg
is to be