Selection Step; Fitting Step - oticon INTIGA Manual

Selection Step

Oticon Intiga is available as a RITE with a dome or custom
mould option. The earpiece options available for Intiga will
be displayed.
38 OTICOn InTIGA FITTInG GUIDE
If you are fitting ConnectLine or adding one or two
Streamers as remote controls to the Intiga instruments,
select Streamer in the feature list.
In the Personal Profile you can provide extra information
and thereby ensure a more personalized fitting for your
client.

Fitting Step

The Connection Bar indicates the connection status of the
instruments. The three states are:
1. Grey - not connected and data changed in Genie is not
saved in the instrument
2. Yellow - Connected and settings are programmed but
not stored in the instrument
3. Green - Connected and settings are programmed and
stored in the instrument and in Genie.
The Adaptation Manager provides easy access to an
acclimatisation process in three steps. Changing steps
effect gain, compression and the frequency response.
Instruments can be fine tuned in 10, 8 and 6 independent
frequency channels for Intiga 10, Intiga 8 and Intiga 6
respectively. By default, the channels are gathered in
three frequency regions: LF, MF and HF.
Soft (45 dB SPL), Moderate (65 dB SPL) and Loud (80 dB
SPL) input levels can be adjusted. Select all three LF, MF or
HF controls by clicking the LF, MF or HF button in the table.
By selecting "All", all gain controls will be selected, the
colours of the control values are blue (left) and red (right)
when the device is at prescribed settings.
If the control value is no longer at prescribed settings,
the value turns black.
39