Clearance Between The Needle And The Shuttle Hook Point - Brother XL5300 Service Manual

Standard
• Clearance between the needle and the shuttle hook point should be 0.02 to 0.1mm.
Adjustment
XL5300 XL5200
2 2
XL5030 XL5020
2 2
PX300 PX200
2 2
Turn the needle bar support stud
3
Clearance between the needle and
the shuttle hook point
XL5100
3 Straight stitch (center needle position)
XL5010
5 Straight stitch (center needle position)
PX100
3 Straight stitch (center needle position)
clockwise or counter clockwise to make adjustment.
Pattern Stitch length
Pattern Stitch length
Pattern Stitch length
- 2 -
Stitch width
M
Stitch width
Stitch width
M