Removing Order Of Covers - Brother XL5300 Service Manual

• Remove accessory table (A).
• Loosen and remove the screws
• Loosen and remove the screw
• Remove all selection dials (D) and gear (G).
• Loosen and remove the screws
• Loosen and remove the screws
Note: The (G) gear is only for use with the PX300, PX200, and PX100 models.
See pages 26-27 for assembly of selecting dial and feed dial.

Removing order of covers

then remove the base plate (B).
then remove the face plate (C).
then remove the front cover (E).
lower the presser foot lifter, then remove the rear cover (F).
- 1 -