Brother XL5000 Getting Started Manual

Brother sewing machine getting started guide xl series

Download this manual

Enlarged version

GETTING STARTED:

XL series Sewing Machines

XL5050NTC

XL5060NTC

Step 1

Step 2

XL5070NTC

Step 3

bobbin, but you may want to fill another bobbin with your own thread.)

Step 4

(Your machine may be supplied with a threaded bobbin,

but you may want to use another bobbin with your own thread.)

Make sure the bobbin case goes in all the way, or the

latch will not hold the bobbin properly.

(Your machine may be supplied with a fully wound

Page 1 GETTING STARTED: XL series Sewing Machines XL5050NTC XL5060NTC XL5070NTC Step 1 Step 2 Step 3 (Your machine may be supplied with a fully wound bobbin, but you may want to fill another bobbin with your own thread.) Step 4 (Your machine may be supplied with a threaded bobbin, but you may want to use another bobbin with your own thread.) Make sure the bobbin case goes in all the way, or the latch will not hold the bobbin properly.
Page 2: Starting To Sew
Step 5 just visible through the slot This should hook the thread around the take-up lever, which is just visible inside the slot. If it does not, then try again. Step 6 If your machine doesn’t have a needle threader, then thread the needle by hand (from front to back), and go straight to Step 7.

Xl5050ntcXl5060ntcXl5070ntc