Installation And Configuration; Package Contents - Philips Video Camera Installation And Operating Manual

2. Installation and Configuration

2.1 Package Contents

The package contains the following:
1x Fastrax II E (Dome Camera)
1x Bubble Ring
1x Instruction Manual (This Document)
3x Assembly Screws for Attaching Fastrax II E
3x Plastic Anchor
1x 10Pin Connector
2x 12Pin Connector
CAUTION: Be sure to have caution labels (E version only) on both body and base of the camera.
Different version will not support alarm input and output.
The dome camera is for use in surface mounting applications and the mounting surface should be capable of supporting loads up to 10lb (4.5kg).
The dome camera's base should be attached to a structural object, such as a hard wood, wall stud or ceiling rafter that supports the weight of the dome
camera.
Unlock Lock
Figure 3 - Installation
Cable entry
Lock
5
Surface (ceiling)
Base
Align extruded tap in the base to
the keyhole on the PCB in the body
Body