Basic Configuration Of Fastrax Ii Dome Camera System - Philips Video Camera Installation And Operating Manual

2.2 Basic Configuration of Fastrax II Dome Camera System

STP AWG #24
Sensor
Alarm input
up to 8
Siren
Light
Alarm output
up to 4
J-Box (Back)
Up to 128 Dome cameras including
32 alarm mode can be connected
at DOME2 port.
DATA2 port should be connected
in case that DOME2 port or DVR
port are used.
Figure 4- Basic installation diagram
The dome camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes.
The system should be installed according to Figures 4 through 9.
Power
24VAC
BNC
Monitor
BNC
unshielded cable
unshielded cable
Keyboard controller
6
Alarm output Alarm input
1 ~ 2 1 ~ 4
Alarm output Alarm input
3 ~ 4 5 ~ 8
RS-485
Half Duplex mode: RX+, RX–
RS-422
Simplex mode: (RX+), (RX–)
Duplex mode: (TX+), (TX–), (RX+), (RX–)
J-Box (Front)
Rear
Power
24VAC
Dome1+
Dome1–