Program And Operation; Selecting Dome Camera; Accessing On-Screen Menu Utility; How To Control On-Screen Menu Utility - Philips Video Camera Installation And Operating Manual

3. Program and Operation

3.1 Selecting Dome Camera

Before you program or operate a dome camera, you must select the dome camera by pressing the dome camera No. + CAM successively.
Example: Pressing 1, 0 and CAM key sequentially will select dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the
keyboard controller.

3.2 Accessing On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing MENU key on the keyboard controller, the following On-screen menu utility will appear:

3.3 How to control On-Screen Menu Utility

Action
MENU
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
CTRL + Joystick
ESC
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
ALARM
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
EXIT(ESC TO EXIT)
Function
Call on On-screen menu utility
Go into the sub-menu items.
Execute the command (exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title. Same effect as Enter key
Change value.
Enter editing title mode at Preset menu.
PTZ control of the selected camera
Escape (EXIT)
15