IMPORTANT SAFEGUARDS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
Servicing: Do not attempt to service this product yourself as removing covers expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage requiring service: Unplug this product from the wall outlet and refer servicing to qualified service personnel. Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
Page 5
Fig. 1 1. Take the camera, system cable and monitor to the area you want to observe (with the monitor on site, you can check whether the camera covers the required area). 2. Connect the camera to the system monitor. 3.
Page 6
Camera sound on/off: Use the monitor On Screen Display Menu to enable or disable the built-in camera microphone. Lenses: The camera is provided with either an integrated lens, integrated auto-iris vari-focal lens or CS-mount vari-focal lens. Field of view The figure below shows the field of view (= covered area) of the different lenses. By means of the auto-iris the amount of light going through the lens is regulated.
Outdoor use: The camera switches to specific settings optimised for outdoor use when connecting an auto-iris lens. Remark: For outdoors, use a protective camera housing has to be used to protect the camera from rain and snow. System Cable: For the interconnections between the system monitor and camera, a 15m/45ft system cable is supplied.