Bosch MUC6...RU Instruction Manual page 9

5. Remove the valve plug
Pull off the valve plug in the steam
release chamber.
6. Open the appliance lid
Open the pressure locking handle (M).
For this purpose, rotate the pressure
locking handle as far as possible in
an anti-clockwise direction. Press the
opening button on the basic appliance to
open the lid.
7. Lift the pan out of the appliance interior.
8. Remove the lid insert
Turn the fastening screw anti-clockwise
and remove it. Use one hand to keep
the lid insert in position on the inside
of the lid. Use the other hand on the
outside of the lid to push the steam
valve in the steam release chamber
MUC6-8_RU_8001018000.indb 9
Before using for the fi rst time
through the opening by applying slight
pressure. Carefully remove the lid insert
from the lid.
9. Remove the packaging material that
is on the appliance and the accessory
parts.
10. Check all parts for completeness.
X Figure A
11. Check the appliance and the accessory
parts for visible damage.
Caution!
Never operate a damaged appliance!
12. Thoroughly clean and dry all parts
before using for the fi rst time. X "Care
and daily cleaning" see page 22
13. Check safety devices
Lid insert: Check the sealing ring on
the lid insert for visible discolouration,
cracks or other damage.
Check that the safety and steam valve
as well as the overpressure protection
are clean. They must not be blocked
by foreign bodies. The overpressure
protection must be able to move freely.
Steam release chamber: Check the
steam valve seal in the steam release
chamber for visible discolouration,
cracks or other damage. Check that
the white steam release lever is clean.
It must not be blocked by foreign bodies.
14. Insert pan
Reinsert the pan in the appliance
interior. The pan handles must be sunk
into the indentations.
en
9
07.03.2016 10:37:56