Language Registration - Hitachi IJ RX2 Service Manual

2.12 Language registration

●
This function is to register screen languages.
Register display language for the IJ printer from the "USB memory containing system data".
●
●
Keyboard type for character input can be selected by input mode.
Input mode
Default
Local language Chinese character, dedicated characters for date, katakana
If "Japanese" or "Simple Chinese" is registered for "language 1," it becomes the setting for
●
"local language." When selecting "local language," Chinese character supported by the
language registered as "language 1" can be input.
1 Insert the "USB memory containing system data".
2 Press Select language at auxiliary functions.
The language selection screen is then displayed.
If Change language is not displayed, set to service personnel maintenance mode on the login
user selection screen.
For information on changing to the service personnel maintenance mode,
refer to "2.1 Setting of service personnel maintenance mode."
Select language
Current language
Registered language
Language1
Language2
Input mode
English
German
French
Selects display language from registered
languages.
3 Press Change language and select the desired language.
Selected language is then registered in place of already registered language.
4 Select language from registered languages
Display language is then changed.
5 Select input mode.
6 Press OK.
Input mode
Accent characters, Greek, Russian and Arabic characters
[Stop
English 01.00
English 01.00
01.00
German
Local Language
Default
2-34
Contents
]
Com=0 2015.07.07 12:45
Change language
Change language
Prev. Next
list list
Cancel
Registers selected language.
.
OK
Back