Backup - Hitachi IJ RX2 Service Manual

2.9 Backup

●
Print data and user data are backed up on a USB memory.
●
Backup data can be copied on an IJ printer.
●
You can select the type of data when copying to the IJ printer.
●
The copying method is replacing the content of USB memory as they are (overwrite copy).
Types of data
Print data
Standard
character
User pattern
Unit-specific
data
(maintenance
screen setting
values, etc.)
Difference between copy target data maintenance modes
Types of data
Print data
Standard
character
User pattern
Unit-specific data
(*1) Logging data output to binary file only.
(*2) Logging data output to either binary file or text file.
(Refer the chapter 2.19 for Detail of Logging text)
(*3) Can copy when the copy target folder has the same serial number as itself.
Data of multiple IJ printers can be backed up in a single USB memory.
A folder with the product serial number is created in the USB memory.
When copying backup data from the USB memory to the IJ printer, select the folder of the
data is to be copied.
A single USB memory can hold data for up to 100 IJ printers data. However cannot exceed
the capacity of the USB memory.
Use the auxiliary function menu for inserting/removing the USB memory.
Do not frequently insert/remove the USB memory.
When copying standard character pattern, execute the data copy function with the printer in
"Stop" state.
[Note]
Do not use the backup data made by RX model software version before V8.06 to the RX2 model
with SOP-15-19.
Types of copy target data
▪ Includes the settings of print contents, print format and print
specifications.
▪ Registered print data is the target of backup; print target data is
not applicable for backup.
▪ To back up print target data, register them and back up as
registered print data.
Includes standard character patterns in all character sizes.
Includes registered characters in all character sizes.
User environment setup,
environment setup, circulation environment settings, system
environment setup, auto phase gain value, fault warning history,
touch panel coordinate information, display environment setup,
excitation setting value, viscosity information, login information,
Operating time, Ink alarm time, cumulative operating time, print
count, various usage time, logging data (viscosity data, ink
automatic replenishment data, circulation control data, fault
warning history, entry trace data)
User maintenance mode
Backup Data copy
(IJP 
(USB memory
 IJP
USB memory)
O
O
O
O (*1)
2-26
Contents
date/time setup,
Service personnel
maintenance mode
Backup
(IJP 
USB memory)
)
O O
O O
O O
X O (*2)
communication
Data copy
(USB memory
 IJP
)
O
O
O
O (*3)