Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 17 5000 Service Manual

GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-F11AC970-2513-4EFB-A6EE-2BB2203AA6D1

Procedure

1 Slide and place the palm rest and keyboard assembly on the display assembly.
2 Using the alignment posts, press the display hinges down on the palm rest and
keyboard assembly.
3 Align the screw holes on the display hinges with the screw holes on the palm rest
and keyboard assembly.
4 Replace the screws that secure the display hinges to the palm rest and keyboard
assembly.
5 Route the display cable through the routing guides on the palm rest and
keyboard assembly.
6 Adhere the tape that secures the display cable to the palm rest and keyboard
assembly.
7 Slide the display cable to the connector on the system board and close the latch
to secure the cable.
GUID-1223BDD5-9B6F-4F20-B7E4-188E1FECED8C

Post-requisites

1 Replace the wireless
2 Replace the battery.
3 Replace the base
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
Before
67