Table Of Contents; Contents; Note The Following Before Starting - Husqvarna TA1100 Operator's Manual

Contents

KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
INTRODUCTION
Dear Customer, .................................................... 4
WHAT IS WHAT?
What is what? ....................................................... 5
GENERAL SAFETY PRECAUTIONS
Guards and cutting attachment ........................... 6
ASSEMBLY
Fitting the loop handle .......................................... 7
Assembling and dismantling the two-piece shaft . 7
Assembling the cutting equipment ....................... 8
Fitting the trimmer guard and trimmer head ......... 8
TECHNICAL DATA
Technical data ...................................................... 9
EC Declaration of Conformity ............................... 9
CONTENTS
Note the following before
starting:
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the operating instructions for the machine.
!
!
The machine is only designed for grass trimming and
grass clearing.
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
WARNING! This accessory may only be
used together with the intended brush
cutter/trimmer, see under heading
"Approved accessories" in chapter
Technical data in the machine's
Operator's Manual.
-
English 3