Specifications - Makita BJS130 Instruction Manual

ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Trigger-lock button
2-2. Switch trigger
3-1. Cutting head
3-2. Screws
3-3. Hex wrench
4-1. Screws
4-2. Side blade L
4-3. Center blade
4-4. Side blade R
4-5. Sleeve
5-1. Cutting head
5-2. Sleeve
5-3. Side blade R
5-4. Center blade
5-5. Side blade L

SPECIFICATIONS

Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for cutting sheet steel and stainless
sheet steel.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-8:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total
determined according to EN60745-2-8:
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
5-6. Screws
6-1. Cutting head
6-2. Screws
6-3. Hex wrench
6-4. Tighten
7-1. Hex wrench
8-1. Hook
10-1. Side blade
10-2. Side blade surface
10-3. Center blade
10-4. Workpiece
11-1. Screws
11-2. Side blade L
11-3. Center blade
11-4. Side blade R
11-5. Sleeve
12-1. Screws
12-2. Side blade L
Model
Steel up to 400 N/mm
Stainless Steel up to 600 N/mm
-1
)
Overall length
Net weight
Rated voltage
) : 74 dB(A)
pA
value (tri-axial vector
2
) : 5.5 m/s
h
2
2
2
ENE037-1
EC-DECLARATION OF CONFORMITY
Model; BJS130
We declare under our sole responsibility that this
ENG101-1
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC.
000230
ENG218-1
sum)
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
4
12-3. Center blade
12-4. Side blade R
12-5. Lubricate
13-1. Limit mark
14-1. Holder
14-2. Hex socket head bolt
15-1. Barrel
15-2. Hex socket head bolt
16-1. Front cover
16-2. Screws
17-1. Spring
17-2. Arm
17-3. Recessed part
18-1. Carbon brush cap
19-1. Hole
19-2. Carbon brush cap
BJS130
1.3 mm (18 ga.)
1.0 mm (20 ga.)
2,800
350 mm
2.4 kg
D.C. 18 V
EN55014 in accordance
CE2007
Tomoyasu Kato
Director
ENH102-7
with Council