Parameter Input; Selecting And Changing Parameters - Pfaff 3307-1 SERIES Instruction Manual

Input
11

Parameter input

.03
11

Selecting and changing parameters

.03.01
11 - 10
Switch on the machine.
Switch to parameter input (LED on the key is off).
Select the function group, e.g. "200" with the corresponding plus/minus key.
200
+
Confirm with Enter.
-
Enter the code, see Chapter 11.03.02 Entering/changing the access code.
201
+
Select parameter "204" (seam pattern size) with the corresponding plus/minus key.
-
204
+
Select the parameter value with the corresponding plus/minus key.
-
204
+
By pressing the sewing mode/parameter input key the values are stored, and the
machine is then in the sewing mode.
-
By pressing the basic position key the parameter input is interrupted, the old
values are kept and the machine changes to the basic position of the parameter
input mode.
+
-
1
+
-
1
+
-
2
+
-