Parameter Settings; Parameter Input Example - Pfaff 521 Instruction Manual

Adjustment
13

Parameter settings

.07
13

Parameter input example

.07.01
2 x
No
No
VAL
13 - 34
Switch on the machine
Select input mode by pressing TE/Speed key twice.
TE
No
101
Select parameter group "500" by pressing the corresponding +/- key.
TE
No
500
Confirm selection by pressing the corresponding +/- key.
Enter the code number, see Chapter 9.09 Entering/changing the code number.
TE
No
501
Select the desired parameter, e.g. "501" by pressing the corresponding +/- key.
Set the desired parameter value by pressing the corresponding +/- key.
By pressing the TE/speed key, the value is taken over and the machine changes to the
sewing mode.
VAL
II
VAL
3500