Installation and commissioning
8
Changing parameter "204"
.04.02
8 - 6
Switch on the machine.
Select the parameter input mode (LED in the key is off).
Using the corresponding plus/minus key select the function group "200".
200
+
Confirm selection with Enter.
-
Enter the code, see Chapter 11.03.02 Entering/altering the access code.
Using the corresponding plus/minus key select the parameter "204".
204
+
Using the corresponding plus/minus key select the value established for the seam
-
pattern size, see Chapter 8.04.01 Establishing the value for parameter "204".
204
+
Conclude parameter input by switching to the sewing mode.
-
+
-
1
+
-
2
+
-