English - Philips WP3811 User Manual

English

6
general description (Fig. 1)
a Filter cartridge
B Water purifier housing
C Water selection lever
D Stainless steel screen
E Rubber washer
F Adapter
1 A-type
2 B-type
3 C type
4 D-type
g Attachment nut
h Filtered water outlet
i Unfiltered water inlet
J Hollow fibre
k Granular activated carbon
important
Read this user manual carefully before you use the appliance and save it
for future reference.
Before daily use
- To prevent quick clogging of the filter cartridge, let the water run at
the unfiltered setting for around 5 seconds before every use.
- If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the filtered setting until the
water is clear.
- Cautions:
1 Let the water run at the filtered setting for 10 seconds before use
each day.
2 Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
3 If you have not used the water purifier for more than two weeks, let
the water run at the filtered setting for 2-3 minutes before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.