Table of Contents
Advertisement
FRONT PANEL DESCRIPTION
4
DISTANCE
CURSOR
ALIGNMENT
VIDEO
CHANNEL
LINK
1
2 3
1 ALIGNMENT MODE buttons: Press DISTANCE for delay in feet, meters, or milliseconds. Press VIDEO for alignment by frames
or milliseconds.
2 CHANNEL button: Press this to switch the cursor location between channels. This button has no effect if the channels are linked.
3 LINK button: Links channels together so changes made affect both channels at once. To treat the channels as a stereo pair, make
sure settings for each channel are identical before pressing the LINK button. Press the LINK button again to unlink.
4 CURSOR buttons: Press left or right cursor to select the value for editing.
5 COARSE and FINE controls: These buttons affect the setting that is currently highlighted to change settings or delay values.
COARSE increments or decrements delay by 1 ms/feet/meters or 1.0 frames, FINE by 0.1 ms/feet/meters or 0.5 frames.
6 LCD Display: Shows the current readout of settings for each channel. Fields may be selected using the CURSOR buttons and
changed using the COARSE / FINE controls. See the DISPLAY sections below.
7 STORE button: Stores the Delay configuration into current memory for the selected channel. If the asterisk
to the right of the display, the current value does not match the memory location.
8 RECALL button: Copies the stored delay setting into the active channel. If channels are linked, then both are recalled.
9 BYPASS buttons: Toggle relays for each channel. If LED is on, bypass is enabled and the device functions like a wire. If bypass LED
is off, the channel is active.
0 SIGNAL / OVERLOAD LEDs: SIG LEDs indicate signal presence on the input. OL LEDs light red when an input signal is near
the maximum level and may clip.
3 4
5
1:
25.50 Feet
2
>2:[
2.74]Meters
1
DISPLAY: DISTANCE MODE
1 Cursor
2 Active Channel(s)
3 Channel #
4 Delay Setting
5 Units (Feet, Meters, ms)
6 Temperature
7 Temp. Units
8 Mem. Bank
9 Memory Indicator - * Shown if different than stored value
Manual-2
RANE AD 22S AUDIO DELAY
CHANNEL 1
CHANNEL 2
6 7
8
80 °F
Mem A *
27 °C
Mem B
Distance Mode
6
3 4
9
2
>1:[
>2:[
1
DISPLAY: VIDEO MODE
1 Cursor
2 Active Channel(s)
3 Channel #
4 Value
5 Units (Frames, ms)
6 Frame rate
7 Units (Frames per second)
8 Mem. Bank
9 Memory Indicator - * Shown if different than stored value
5
7
STORE
1
COARSE
FINE
MEMORY
BYPASS
RECALL
2
8
9
*
5
6 7
2.5]Frames
29.97 fps
3.0]Frames
29.97 fps
Video Mode
0
1
1
AD22S
SIG
OL
AUDIO DELAY
2
2
character is shown
8
9
Mem A *
Mem A
Advertisement
Table of Contents
