Rear Panel; Architectural Specifications - Rane AD22S Manual

AD22S
AUDIO DELAY

Rear Panel

Architectural Specifications

The digital audio delay unit shall be a single rack space, bal-
anced two-input, two-output configuration. The delay adjust-
ment range shall be from 2.00 to 999.99 ms, adjustable in 0.01
ms increments via increment / decrement pushbuttons, in 10 µs
or 1 ms intervals. Additionally, the values shall be selectable in
terms of distance in feet or meters, as well as in frames for all
common NTSC and PAL / SECAM frame rates.
A 40x2 backlit character LCD shall indicate current delay
settings and provide cursor controls for selecting and setting the
delay values and configuration parameters, including tempera-
ture, frame rate, and stored memory values. Bypass status, signal
/ overload presence and mode of operation shall be indicated
with individual indicators.
References
1. Shaw, N. "Digital Delays, Parts One, Two & Three," Sound & Communications, vol. 39, nos. 3, 5 & 10, (March, May, & October 1993).
2. Bohn, D. "Environmental Effects on the Speed of Sound,"J. Audio Eng. Soc., vol. 36, pp. 223-231 (April 1988).
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 TEL 425-355-6000 FAX 425-347-7757 WEB rane.com
Data Sheet-4
Terminals on the rear panel shall allow remote disabling of
the front panel controls and bypass switches. Additional termi-
nals shall provide access for remote switches to recall memory
settings.
The inputs and outputs shall be active balanced with XLR
connectors, and include switchable fail-safe output relays on each
channel that automatically enable in the event of power failure.
RFI filters shall be provided.
The unit shall be capable of operation by means of its own
built-in universal power supply operating at 100-240 VAC and
meet CE requirements. The unit shall be UL and cUL listed.
The unit shall be a Rane Corporation AD22S.
All features & specifications subject to change without notice. 9-2015