NTSC or PAL/SECAM frame rates. The AD22S can operate as two independent channels or as a linked or stereo pair. Front panel controls let you choose settings for each channel that can be stored into two nonvolatile memory locations for quick and easy access at any time.
FRONT PANEL CONTROLS The first thing to decide is which alignment mode to use. If you’re using the AD22S to synchronize audio with video, then select Video mode. Otherwise select Distance alignment. The Distance and Video buttons on the left hand side of the unit switch between the two modes.
Features Front Panel Alignment Mode Buttons: Press Distance for delay in feet, meters, or milliseconds. Press Video for alignment by frames or milliseconds. Channel Button: Press this to switch the cursor location between channels. This button has no effect if the channels are linked.
Distance Mode: Use Cursor buttons to highlight the unit type, then select between milliseconds, feet, or meters. The AD22S also needs to know the temperature. To set, select and set the unit type to °C or °F, then select and set the temperature.
Page 8
In some situations it may be necessary to recall a stored setting or enable channel bypass from a location other than where the AD22S is located. Have a room divider wall? You can install a switch to select between the two room settings automatically when the wall is moved.
Specifications are subject to change without notice. Trademarks & Licenses Rane is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other product names, company names, trademarks, or trade names are those of their respective owners.