Page 1
K 4.130 Operating Instructions Before first use of the unit Please read these Original Operating Instructions and act in accordance with them 59631360 10/08...
Dear Customer, Safety instructions Please read and comply with these original operating instructions prior Danger to the initial operation of your appliance and Never touch the mains plug and the socket store them for later use or subsequent owners. with wet hands. The appliance must not be used if the power General information cord or important parts of the appliance, e.g.
The appliance may only be connected to an Warning electrical supply which has been installed in The mains plug and the coupling of an exten- accordance with IEC 60364. sion cable must be watertight and must nev- The appliance may only be connected to al- er lay in the water.
Before Startup Operation Illustration Description of the Appliance Mount loose parts delivered with appliance prior to start-up. When unpacking the product, make sure that no Illustration accessories are missing and that none of the Push the high pressure hose into the trigger package contents have been damaged.
Switch the appliance on "I/ON" and operate Use spray lance with pressure regulation until the water exits the high-pressure con- (Vario Power). nection without bubbles. Turn the spray lance to "Mix" position. Turn off the appliance "0/OFF". Note: This will mix the detergent with the wa- ter stream.
Maintenance and care Troubleshooting You can rectify minor faults yourself with the help Danger of the following overview. Turn off the appliance and remove the mains If in doubt, please consult the authorized cus- plug prior to any care and maintenance work. tomer service.
10 I/min Banbury Max. feed pressure 1,2 MPa Oxon, OX16 1TB Suction height (max.) 0,5 m or E-mail us: Performance data info@karcher.co.uk Detergent flow rate 0,3 I/min Recoil force of trigger gun 15 N Hand-arm vibration 1,35 m/s² (ISO 5349) Dimensions...
Page 9
CE declaration We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.
Need help?
Do you have a question about the K 4.130 and is the answer not in the manual?
Questions and answers