Table of Contents
Advertisement
Adjustment of the Projection Angle
Before the Adjustment
• Refer to the user's manual of the projector, switch on the power and project an
image.
• From the menu, select "Setup" ➔ "Installation" ➔"Orientation" and select the
projection orientation.
Select "Ceiling/Front" when projection is from the front side, and "Ceiling/Rear"
when projection is from the rear side.
• Provisionally determine the projection size with the motorized zoom, then perform
the angle adjustment.
1
Adjust the Left-Right Angle
Adjust so that the left-right image is projected to the center of the screen, then securely
tighten the four left-right angle adjustment screws.
Maximum adjustment angle +/-10˚
10˚
10˚
11
Left-right angle adjustment screws
(There are also screws on the
opposite side.)
Advertisement
Table of Contents
