Operation - ALLEN & HEATH XONE:22 Service Manual

Testing the unit:
Before operating the equipment, read and adhere to the Important Safety Instructions
printed in the user guide. Test that the service work has been successfully carried out.
Shipping the unit:
Use adequate packing such as the original packaging or purpose designed flight case if
you need to ship the unit. To avoid injury to yourself or damage to the equipment take
care when lifting, moving or carrying the equipment.

Operation:

To test the console make sure it is connected as described in the user guide. Check
that the voltage setting marked on the rear panel is correct for the local mains supply.
Fault finding:
For effective fault diagnosis trace the signal flow through the circuit path. Refer to the
system block diagram.
Heath.
ALLEN&HEATH
Replacement circuit assemblies are available from Allen &
Xone:22 service manual AP7528_3 Page - 6 - of 12