Typical System Setup - Bosch DICENTIS Hardware Installation Manual

8 en | System installation overview
3.1

Typical system setup

1
7
8
5.2
Figure 3.1: Typical DICENTIS Conference System setup
A typical DICENTIS Conference System consists of:
1.
2.
3.
4.
5.
6.
7.
8.
9.
2016.09 | V1.4 |
2
8
8
4
6 6
5
System server controller (PC):
– The heart of the system. It licenses functionality, configures and controls the system.
Client PC:
– Can be used to: Manage meetings, prepare meetings and configure the system.
Audio Powering Switch (DCNM-APS / DCNM-APS2):
– Controls the system audio, routes audio from and to the system and supplies power
to the DICENTIS devices.
Powering Switch (DCNM-PS / DCNM-PS2):
– Is used to increase the number of DICENTIS devices connected to the system.
DICENTIS devices): DCNM-D, DCNM-DVT, DCNM-DSL, DCNM-DE / DCNM-MMD, DCNM-
MMD2:
– Participants can use their DICENTIS device to contribute to a meeting.
– 5.1 is a DICENTIS multimedia Device used for "system power on/off". This device is
always connected to the powered socket of the Audio Powering Switch or Powering
Switch.
Note: Only one DICENTIS multimedia Device should be connected here.
– 5.2 is a DICENTIS device used via a "Power over Ethernet" (PoE) Ethernet switch.
Note: Only one DICENTIS device should be connected here.
System Network Cable (DCNM‑CBxxx):
– Connects DICENTIS devices, the Audio Powering Switch, and one or more Powering
Switches to each other.
Ethernet switch:
– Ethernet switch with PoE on some ports.
- Routes the system data via Ethernet.
- Provides power to the DICENTIS devices via PoE.
CAT‑5e Ethernet cable (minimum requirement).
Optional HD Conference Dome (VCD‑811-IWT) + external power supply:
– Captures the image of a speaking participant.
Hardware Installation Manual
9
5.1
8
8
6
8
3
6 6
DICENTIS
Bosch Security Systems B.V.