Table of Contents
Advertisement
scope HS3. Refer to paragraph
power intput.
5.2
Connect the instrument to the computer
After the new driver has been pre-installed (see chapter 4), the
Handyscope HS3 can be connected to the computer. When the
Handyscope HS3 is connected to a USB port of the computer,
Windows will report new hardware. The Found New Hardware
Wizard will appear.
Depending on the Windows version, the New Hardware Wizard
will show a number of screens in which it will ask for information
regarding the drivers of the newly found hardware. The appearance
of the dialogs will differ for each Windows version and might be
different on the computer where the Handyscope HS3 is installed.
The driver consists of two parts which are installed sepa-
rately.
Once the first part is installed, the installation of the second
part will start automatically. Installation of the second part is
identical to the first part, therefore they are not described individ-
ually here.
20
Chapter 5
7.1
for specifications of the external
Advertisement
Table of Contents
Need help?
Do you have a question about the Handyscope HS3 and is the answer not in the manual?