Surveon SMR Desktop Series Quick Installation Manual

Smart Megapixel Recorder
Desktop Series
Installation
Warning!
Only qualified service personnel should install and service this product in order to avoid risk of injury from
electrical shock and energy hazard.
Observe all ESD (Electro-static Discharge) procedures during installation to avoid damage to the recorder
and its components.
Accessories for 2 Bay Models Accessories for 5 Bay Models
Quick Installation Guide x1
Quick Installation Guide x1 ●
●
Product DVD x1 (including manuals)
Product DVD x1 (including manuals) ●
●
Power Cord x1
Power Cord x1 ●
●
HDD Screw x40
HDD Screw x20 ●
●
LAN Cable
LAN Cable ●
●
China RoHS x1
China RoHS x1 ●
●
Accessories for 6 Bay Models Accessories for 8 Bay Models
Quick Installation Guide x1 Quick Installation Guide x1
●
●
Product DVD x1 (including manuals) Product DVD x1 (including manuals)
●
●
Power Cord x1
● Power Cord x1
●
HDD Screw x40
● HDD Screw x40
●
Capture Card and BNC Cables
● LAN Cable
●
LAN Cable
● China RoHS x1
●
China RoHS x1
●
User-provide Items
LAN Cable
● Flat blade ● Philips ●
Screwdriver Screwdriver USB compatible Keyboard and Mouse
●
Monitor
●
3.5" SATA Hard Drive
●
(Optional) PC(s) with Windows XP (or above) Used as Remote
●
VMS Client Management Center
1
Hardware Overview
Front View
6 bay models
1 2 3 4 5
5 bay models
2 bay models
1 2 3 4 5
4 5
6
7
6
1 LCD Display 4 LED Indicators
2 Enter Switch 5 Power Switch
3 Select Switch 6 Front USB Connector
QM0 0 S MR A D R 1 1
© by Surveon Technology, Inc. All rights reserved.
Rear View
QUICK INSTALLATION GUIDE
2 bay models
2
3
4
5
8
6
7
1 Power Socket
2 e-SATA Port x1
3 USB Port x4
4 LAN Port x2
Note: The functions of e-SATA port and COM port are reserved.
2
Adding Hard Drives
Note: For users of 6 bay models, please go to Capture Card Quick Installation Guide first.
. .
Model
2 bay models
5 bay models
6 bay models
8 bay models
1 2 3 4 5
8 bay models
Hard Drive Installation Prerequisites
Purchase hard drives having the same capacity and using same interface with the pre-installed ones.
Inserting Hard Drive into Drive Tray
1. Open the front panel of the EMR system.
2. Press the release button (indicated by the blue arrow)
on the bezel, the bezel panel should open automatically
and gently pull out the hard drive tray.
6
6
7 Video Switch
3. Place the hard drive into the drive tray.
Make sure the hard drive's interface
connector is the open side of the drive
tray and its label side facing up. Adjust
the drive's location until the mounting
holes in the drive tray are aligned with
those on the hard drive. Secure the drive
with four supplied flat head screws
6 bay models
14
13
5 bay models
3
4
6
1
9
2 10
8
5
3
11
4
1
5
12
6
8
9
COM Port 13 Audio Ports
5 5 9
Restore Button
6 6 VGA Port 10 HDMI Port 14 BNC Connector
12V DC Power Port
7 7 11 USB Port x2
8 8 Kensington Lock-hole 12
Safety Switch
Space for Hard Drives
RAID Options
NonRAID, RAID1
2 HDD
NonRAID, RAID1,5
5 HDD
6 HDD NonRAID, RAID1, 5
NonRAID, RAID1, 5
8 HDD
.
Password:
9
. . . . . .
4. With the tray bezel open, insert the hard drive and
tray into the system enclosure.
8 bay models
5. Close the tray bezel.
6. Use the small flat blade screw driver to turn the bezel lock
from the unlock to lock position.
7. Repeat above steps to install other hard drives.
8. Close the system front panel when you are done installing
hard drives.
3 System Connections
Internet
DHCP Router
GbE Switch
SMR Pro
SELECT
ENTER
Smart Megapixel Video Recorder
Connect cables to the rear panel ports as follows:
Insert mouse, keyboard to the USB for operating VMS on the SMR system.
●
Insert the LAN Cable to the LAN Port to a local network where your IP Camera reside.
●
(Connection to analog cameras is also available via an IP encoder).
Connect an external monitor capable of 32 bit or higher color quality to the VGA port to view the
●
VMS interface.
Check Network Topology
Please make sure if your network environment has DHCP service. For devices without DHCP server
function such as switch and hub, please choose Fixed IP Address in Install Wizard (s
and then enable DHCP server after logging into VMS (section 7).
Remote Client/Web Client
Management Center
Camera(s)
VGA Station for Local Client
ection 6, step7)
/4
1/3