TP-Link m7310 User Manual page 11


Press this button to select the icon or option.

Micro USB Input: Plug in the USB charging cable to this port to charge your Mobile Wi-Fi.
 RESET Button (hole): It's the button to restore the Mobile Wi-Fi to its factory defaults.
While the Mobile Wi-Fi is powered on, remove the cover. Use a pin to press and hold the
RESET button until Power Off appears on the screen.

Note:
Resetting the Mobile Wi-Fi to its factory defaults will clear all previous configuration and
you may need to reconfigure it.

Screen Display: The LCD Screen will turn off automatically after 15 seconds. Please
press the Power or Menu button to turn it on again.
Home Display
Item Description
Signal strength
Network Type and Internet
Connection
Data Roaming
Unread messages
Wi-Fi Status and Connected
Wi-Fi Devices
Remaining Battery
Cumulative Traffic Usage
Download speed
M7310 LTE-Advanced Mobile Wi-Fi User Guide
Indication
Indicates the signal strength of current network.
Indicates the current network option: 3G /4G, and the successful
network connection.
Indicates you are in roaming service.
Indicates that there is un-read message(s) and the amount of
un-read messages.
Displays the Wi-Fi status and the amount of current wireless
clients.
Displays the remaining battery power.
Indicates the total used-data. It will be cleared after the Mobile
Wi-Fi is reset.
Indicates the download speed of current data transmission.
-4-