Panasonic TH-103PF12E Service Manual page 44

TH-103PF12E
9.37.2. Removal of V1-Board and V3-Board
1. Remove 1 screw (P).
2. Disconnect the connector (V1) and then remove V1-
Board.
3. Remove 1 screw (Q).
4. Disconnect the connector (V3) and then remove V3-
Board.
9.37.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V3-Board.
(Refer to Removal of V1-Board and V3-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove 20 screws and then remove the Cabinet Joint
Metals (B, BS).
5. Remove 8 screws.
6. Remove the Cabinet Joint Metals (A, AS) and Cabinet
(left, right, upper, lower)
44