3.2 Assignment of VM (DPT) Extension Ports
3.2
Assignment of VM (DPT) Extension Ports
a.
Go to the "Configuration-Extension Port" screen. Follow the procedure below for the
extension port which you want to assign as a VM port.
b.
Set the port's "Connection" to "OUS".
c.
Select the attribute of "DPT Property-Type" to "VM (DPT)".
d.
Assign "DPT Property-VM Unit No." and "DPT Property-VM Port No.". Incoming calls will
hunt starting at the lowest VM Port number.
e.
Click "Apply" to save the changed data.
f.
Set the port's "Connection" to "INS".
To determine how and when the PBX directs outside calls to the VPS, refer to 4.2 KX-TDA Series
PBX Programming for DPT Integration in the Installation Manual.
32
Getting Started