JVC PD-42V31BJE Service Manual page 17

3.1.14 REMOVING THE FRONT FILTER (Fig. 6)
•
Remove the REAR COVER.
•
Remove the CHASSIS SHIELD BRACKET.
•
Remove the TERMINAL COVER.
•
Remove the CHASSIS BASE (with each PWB affixed on the
CHASSIS BASE).
•
Remove the PDP UNIT.
(1) Remove the 4 mounting bosses [k], the 6 screws [l] and
the 6 screws [m], and withdraw the GLASS HOLDERS.
(2) Remove the FRONT FILTER with enough care not to
damage it.
GLASS HOLDER
SIDE FRAME BRACKET
3.1.15 REMOVING THE TOP FRAME BRACKET, BOTTOM FRAME
•
•
•
•
•
m
(x6)
o
(x2)
c
SIDE FRAME BRACKET
TOP FRAME BRACKET
BOTTOM FRAME BRACKET
(x2)
n
o
p
c
Fig. 6
BRACKET AND SIDE FRAME BRACKET (Fig. 6)
Remove the REAR COVER.
Remove the CHASSIS SHIELD BRACKET.
Remove the TERMINAL COVER.
Remove the CHASSIS BASE (with each PWB affixed on the
CHASSIS BASE).
Remove the PDP UNIT.
(1) Remove the 4 screws [n], the 6 screws [o] and the 1 screws
[p], and remove the TOP FRAME BRACKET, BOTTOM
FRAME BRACKET and SIDE FRAME BRACKET.
k
(x4)
o
o
(x2)
FRONT PANEL
n
(x2)
l
(x6)
FRONT FILTER
(No.YA013) 1-17