JVC PD-42V31BJE Service Manual page 16

3.1.12 REMOVING THE SPEAKER ASS'Y(R) AND SPAKER
ASS'Y(L) (Fig. 5)
•
Remove the REAR COVER
(1) Remove the 4 screws [f], withdraw the BACK COVER(R)
and the SP HOLDER ASS'Y.
(2) Disconnect the connector [CN60SR] from the AUDIO PWB.
(3) Remove the 2 screws [g], and remove the SPAKER
ASS'Y(R).
(4) Remove the 4 screws [h], and withdraw the BACK
COVER(L) and the SP HOLDER.
(5) Disconnect the connector [CN60SL] from the AUDIO PWB.
(6) Remove the 2 screws [i], and remove the SPEAKER
ASS'Y(L).
NOTE:
•
It is advisable to take note of the connecting location
(connector number) of the removed connectors.
BACK COVER(R)
SP HOLDER ASS'Y
1-16 (No.YA013)
f
(x4)
g
(x2)
SPEAKER ASS'Y(R)
j (x6)
Fig. 5
3.1.13 REMOVING THE WOOFER SPEAKER ASS'Y (Fig. 5)
•
Remove the REAR COVER.
(1) Disconnect the connector [CN60CB] from the AUDIO PWB.
(2) Remove the 6 screws [j], and remove the WOOFER
SPEAKER ASS'Y.
NOTE:
•
It is advisable to take note of the connecting location
(connector number) of the removed connectors.
h
(x4)
SP HOLDER
WOOFER SPEAKER ASS'Y
BACK COVER(L)
i
(x2)
SPEAKER ASS'Y(L)