3.1
DISASSEMBLY PROCEDURE [DISPLAY UNIT]
CAUTION:
•
When exchanging parts etc. with the front side (PDP side)
fancing down,please place a protection sheet below before
starting, so as to prevent scratches on the front side.
A
DISASSEMBLY
B
(x4)
(x12)
SECTION 3
3.1.1 REMOVING THE REAR COVER (Fig. 1)
(1) Remove the power cord and system cable.
(2) Remove the 12 screws[A] and 9 screws [B], and remove
the REAR COVER.
REAR COVER
Fig.1
B
(x5)
(No.YA013) 1-11