Using the CD or DVD Drive
CD or DVD Drive
This section covers:
Inserting a Disc
Removing a Disc
Manually Ejecting a Disc
Inserting a Disc
To load a disc into the disc drive, complete the following steps:
Ä
CAUTION: Improper handling of a CD or DVD can damage the disc
and could potentially damage the drive.
Ä
CAUTION: Before closing the disc tray, ensure that the disc snaps
onto the spindle in the center of the tray. You can damage the disc
and your Notebook if the disc is not seated properly.
1. Press the Eject button located on the front of the drive.
2. Remove a disc from its protective case, holding the disc by its
center hole and outer edge to avoid touching the surface.
5–2
User Guide
Evo Notebook N160 Series