Table of Contents
Advertisement
HP 8719ET/20ET/22ET
HP 8719ES/20ES/22ES
RF Network Analyzers
Replacing the Line Fuse
Tools Required
• small slot screwdriver
Removal
WARNING
For continued protection against fire hazard, replace fuse only with
same type and rating (3 A 250 V F). The use of other fuses or
materials is prohibited.
1. Disconnect the power cord.
2. Use a small slot screwdriver to pry open the fuse holder.
3. Replace the blown fuse. For 115V operation, use a 5A 125V TD fuse (HP part number
2110-1059). For 230V operation, use a 4A 250V TD fuse (HP part number 2110-0734).
Replacement
1. Replace the fuse holder.
Service Guide
Assembly Replacement and Post-Repair Procedures
Replacing the Line Fuse
14-5
Advertisement
Table of Contents
Need help?
Do you have a question about the 8719ET and is the answer not in the manual?
Questions and answers