Midi Monitor - Yamaha MOXF6 Owner's Manual

3 Quick Edit Knobs
This section lets you adjusts various parameters assigned to the Knobs on the front panel of the MOXF6/
MOXF8 instrument.
1 [TONE 1]/[TONE 2]/[TONE 3]/[VOL/PAN] buttons and Knobs 1 – 4
Clicking the [TONE 1]/[TONE 2]/[TONE 3]/[VOL/PAN], selects the set of functions assigned to the four
knobs on the right.
You can click each of the four knobs to adjust the value of the assigned function.
2 [EQ]/[EFFECT]/[ARP] buttons and Knobs 5 – 8
Clicking the [EQ]/[EFFECT]/[ARP], selects the set of functions assigned to the four knobs on the right.
You can click each of the four knobs to adjust the value of the assigned function.
4 ARP (Arpeggio)
Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 6).

5 MIDI monitor

Turns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off
messages transmitted to the MOXF6/MOXF8 will be shown on the virtual keyboard at the bottom
of the Editor window. Turn the MIDI monitor on if you want to confirm the edit result by playing the
MOXF6/MOXF8 or the MIDI keyboard connected to the computer.
6 [A.Func] (Assignable Function) button
This button is related to "All AF off," "AF1 on" and "AF2 on" selected as a value of the XA Control
parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the
Owner's Manual of the MOXF6/MOXF8.
7 Keyboard
Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or
drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window
(page 37) as the MIDI OUT parameter.
n
The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter
in the Setup window.
n
When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking
(Windows) / <control> key + clicking (Mac) on the virtual keyboard. From the menu called up by right-
clicking (Windows) / <control> key + clicking (Mac), selecting "Initialize key" will initialize all the parameter
settings except for the waveform assignment of the currently selected drum key, while selecting "Initialize key
(with Wave)" will initialize the all the parameter settings including the waveform assignment.
8 MIDI Thru (only for stand-alone version)
Supports the MIDI Thru (Port1 MIDI In  Port1 MIDI OUT) function. Data are transmitted to and affect
the currently selected part.
MOXF6/MOXF8 Editor Owner's Manual
1
MOXF6/MOXF8 Editor Window: Bottom section
2
(page 39)
32