Rear cover
Setscrews (B)
Setscrews (C)
Setscrews (D)
Y-carriage supporter
Replacing External Parts (4) Rear Cover
Setscrew (A)
Rear cover
Carriage cover
Setscrews (E)
Replacing the Rear Cover
To remove:
1. Remove the face cover, bed cover.
2. Remove the setscrew (A).
3. Remove the 2 setscrews (B), (C), and (D).
4. Remove the carriage cover.
5. Loosen the setscrew (E), and shift the Y-carriage
supporter up.
6. Unlock the hooks, raise the carrying handle and
remove the rear cover by opening the left end of
the covers.
To attach:
7. Follow the above procedure in reverse.
NOTE:
Adjust the Y-carriage supporter (refer to page 27).
Rear cover
4
Machine
socket part
Front cover