Carriage cover
Setscrew (B)
Replacing the Carriage Unit
Setscrew (A)
Setscrew (B)
To remove:
1. Remove the face cover, bed cover and front
cover.
2. Remove the setscrew (A) and remove the
carriage cover.
3. Remove the 4 setscrews (B) and remove the
carriage unit.
To attach:
4. Follow the above procedure in reverse.
NOTE:
Adjust the Y-carriage supporter.
5. Turn the power switch on to move the carriage to
the stored position, then turn the powers switch
off.
21
Carriage unit
Setscrew (B)
Setscrew (B)