Rear Cover - Singer 5400 Series Service Manual

Service Manual
Removal:
1
- Raise carrying handle and remove the free-arm extension table.
2- Remove the bottom bed cover located under the machine.
3- Loose screws (A) and screw ( C ) by turning them twice.
4- Remove the 6 screws (B)
5- Turn on the machine
6- Remove the cover from needle plate area first, for there are tips in this area connecting the front
cover.
7- Remove the cover by pulling it straigh upwards.
Replacement:
1
- Replacement is the same as removal in reverse Order.
Note:
Make sure the covers (rear and front) are correctly connected, specially in the needle plate area
tips.
Rev. n .
o
MAY/00

Rear Cover

12
P/N 357773-002