Replacing The Exterior Parts; Front Panel (To Front Enclosure); Rear Enclosure - Singer 9985 Service Manual

REPLACING THE EXTERIOR PARTS

The exterior parts should be replaced in reverse se-
quence when removing. (K. to A.)
K. Front panel (to Front Enclosure)
1. Place front enclosure and fit the hook (h) and
retighten the 5 screws (c-g).
2. Connect the 2 connectors (a: Start/Stop switch board)
(b: Controller jack assy.)
J. Rear Enclosure
1. Lower the presser foot lifter.
2. Replace the rear enclosure.
3. Retighten the 3 screws (a, b, c).
(Screw-c is longer than others and replace loosely.)
1
c
d
2
b
3
c
b
a
SERVICE MANUAL
e
f
h
g
a
9