Adjusting The Y-Carriage Supporter - Singer S-10 Service Manual

Y-carriage supporter
0.2 mm

Adjusting the Y-carriage Supporter

Setscrew
1. Remove the carriage cover.
2. To eliminate a vertical play of the Y-carriage,
adjust the position of the Y-carriage supporter.
3. Loosen the setscrew and insert a 0.2 mm thick
gauge under the Y-carriage supporter.
4. Tighten the setscrew while pressing the
Y-carriage supporter down against the gauge.
5. Attach the carriage cover.
27