Adjusting The Refrigerator And Freezer Interiors; Refrigerator Interior; Sure-Lock Shelves; Meat/Cheese Drawer Shelf - Maytag RTD1700AAL Owner's Manual

ADJUSTING THE REFRIGERATOR AND FREEZER INTERIORS
Refrigerator Interior Freezer Interior
Sure-Lock Shelves Freezer Shelf
The refiigerator shelves are adjustable, allowing The freezer shelf can be adjusted to either of
yon to arrange the shelving to fit your t_amil_ two positions to accommodate the food load.
fhod storage needs. Never attempt to adjust a To remove the shelf:
shelf that is loaded with food. 1. Lift up on the shelf and push to the rigbt.
To remove the refrigerator shelf: 2. Tilt the left side of the shelf up and remove.
1. (;rasp the shelf at the front with one hand and To replaee the shelf:
push up under tile shelf back with the other 1. Tilt the shelf and insert the right md ends into
band. the upper portion of the oblong holes in the
freezer wall.
'2. IJft the shelf straight out. 2. Lower the left side oftbe shelf and insert into
the oblong holes on the left side, Make sure
the shelf is secure be_bre loading.
Keepers
Some refi'igerator door bins have"keepers" to
secure bottles and containers. The keepers will
help prevent items from tipping or failing when
the door is open and shut.
On adjustable door [)ins, lift the keeper sligbtly
To replace the refrigerator shelf: to slide from side to side, On fixed door bins,
siinply slide the keeper from side to side.
1. Keeping the shelf'horizontal, guide the three
snpport tabs into the slots in the shelf
supports at the rear of the cabinet.
2. Lower tbe sbelf until the tabs lock into pos
ition. Make sure the shelf is securely locked
into position before loading it with food.
Meat/Cheese Drawer Shelf
The shelf that hohts the Meat/Cheese drawer
can be placed in one of three positions. When
adjusting this she]f, remove the Meat/Cheese
drawer and look at the back wall of the drawer
frame. It is necessary for the air inlet tube at
the back of the refrigerator to line up at the
top, middle or bottom of the air slots in the
back of the Meat/Cheese drawer frame for
the temperature control to work properly.
Set the temperature control to the coldest
position when positioning the Meat/Cheese
drawer. Once the shelf has been adjnsted,
replace the drawer and set the control to the
desired setting (see page 6).
If not positioned eorreetl3; items on the
shelf below the drawer may" freeze.
PAGE 5