Adjusting The Refrigerator And Freezer Interiors; Refrigerator Interior; Sure-Lock Shelves; Door Bins - Maytag RTD21A Use And Care Manual

Table of Contents

Advertisement

ADJUSTING THE REFRIGERATOR AND FREEZER INTERIORS
Refrigerator
Interior
Door Bins
The pick-off refrigerator door bins are adjustable
Sure-Lock
Shelves
and can be easily remove(]. They are a complete
The refrigerator shelves are adjustable, allowing
bin, so items may be carried in the bin without
you to arrange the shelving to fit your iamily_
falling out.
food storage needs. Never attempt to adjust a
To remove the door bins:
shelf that is loaded with food.
Lift the bin straight up. Tip out the bottom of
To remove the refrigerator
shelf:
the bin and pull out the bin.
1. Grasp the shelf at the fi'ont with one hand and
push up under the shelf back with the other
hand.
2. Pull the shelf straight out.
_ll
d'_ Ilit
]_'_
TO replace
the door bins:
G_,_._[-_-
Insert the top hooks first. Then push in and
dowu.
To replace
the refrigerator
shelf:
Keepers
1. Keeping the shelf borizontal, guide the three
support tabs into the slots in the shelf
Some refrigerator door bins bm_e "keepers" to
supports at the rear of the cabinet,
secure bottles and containers. The keepers will
help prevent items from tipping or }:ailingwhen
2. Lower the shelf until the tabs lock into
the door is opened and shut.
position. Make sure the shelf is securely
On adjustable door bins, lift the keeper slightly
locked into position before loading it with
to slide from side to side. On fixed door bins,
food.
simply slide the keeper from side to side.
To position the MeaffCheese
drawer shelf:
The shelf that holds the Meat/Cheese drawer
can be placed in one of three positions. When
adjusting this shelf, remove the Meat/Cheese
drawer and look at the back wall of the drawer
frame. It is necessary" for the air inlet tube at the
back of the refrigerator to line up at the top,
middle or bottom of the air slots in the back of
the Meat/Cheese drawer frame for the
temperature control to work properly. Set the
temperature, control to tl,e coldest position
when positioning the Meat/Cheese
drawer. Once
the shelf has been adjusted, replace the drawer
and set tbe control to the desired setting (see
page 7).
PAGE 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents