Table of Contents
Advertisement
ADJUSTING
THE REFRIGERATOR AND FREEZER INTERIORS
Refrigerator
Interior
To position
the Meat/Cheese
drawer shelf:
Sure-Lock
Shelves
The shelf that holds the Meat/Cheese
drawer
can be placed in one of three positions. When
The refrigerator shelves are adjustable, allowing
adjusting this shelf, remove the Meat/Cheese
you to arrange the shelving to fit your family's
drawer and look at the back wall of the drawer
food storage needs. Never attempt
to adjust a
frame. It is necessary for the air inlet tube at the
shelf that is loaded with food.
back of the refrigerator to line up at the top,
middle or bottom of the air slots in the back of
To remove
the refrigerator
shelf:
the Meat/Cheese drawer frame for the
1. Grasp the shelf at the front with one hand and
temperature
control to work properly. Set the
push up under the shelf back with the other
temperature control to the coldest position
hand.
when positioning the Meat/Cheese drawer. Once
the shelf has been adjusted, replace the drawer
2. Pull the shelf straight out.
and set the control to the desired setting (see
page 6).
Freezer
Interior
Freezer
Shelf
The freezer shelf can be adjusted to either of
two positions to accommodate the food load.
To remove the shelf:
To replace the refrigerator
shelf:
1. Lift up on the shelf and push to the right.
2. Tilt the left side of the shelf up and remove.
1. Keeping the shelf horizontal, guide the three
support tabs into the slots in the shelf
To replace
the shelf:
supports at the rear of the cabinet.
1. Tilt the shelf and insert the right rod ends into
the upper portion of the oblong holes in the
2. Lower the shelf until the tabs lock into
freezer wall.
position. Make sure the shelf is securely
2. Lower the left side of the shelf and insert into
locked into position before loading it with
the oblong holes on the left side. Make sure
food.
the shelf is secure before loading.
PAGE 5
Advertisement
Table of Contents
