IBM ThinkPad T20 Hardware Maintenance Manual page 83

3. To make sure that the front side of the keyboard is
housed firmly, gently press the shift keys with your
thumbs and try to slide the keyboard towards you. Do
not push parts (A) and (B) on the keyboard strongly; to
do so might cause distortion of the Ultrabay 2000 slot
and the PC Card slot.
4. Replace the screws, using the new screws provided
with the keyboard. Then press the Y key again, hard,
to make sure that the keyboard is firmly connected.
(A)
ThinkPad T20, T21, T22 and T23 series
Removing and replacing a FRU
(B)
79