IBM ThinkPad T20 Hardware Maintenance Manual page 134

Cable routing: Route the antenna cables as follows;
1. Hook the black antenna cable to projetion ( 1 ) on the
right corner of the rear cover.
2. Route the black antenna cable to go through cable
guides 2 and 3 .
3. Hook the gray antenna cable to projection ( 4 ) on the
left corner of the rear cover.
4. Route the gray antenna cable to go through cable
guides 5 .
5. Make sure that both of the cables are not twisted.
6. Stick insulation tapes 6 , 7 and 8 .
4
8
130
ThinkPad T20, T21, T22, T23 (MT 2647/2648)
6
7
Removing and replacing a FRU
2
5
1
3