Data Transmission Between Car And - Volvo XC90 TWIN ENGINE Owner's Manual

Note that only the download can be cancelled,
when the installation phase has started, this can-
not be cancelled.
Background search for software
updates
The function can be deactivated via the centre
display:
1. Press Settings in the top view.
2. Press
System Download
3. Deselect Auto Software Update
If an update is available, the message
software updates available is shown in the
centre display's status bar. A tap on the message
starts a download application in the home view's
bottom subview. As soon as the download appli-
cation has started, an icon in the download appli-
cation's button System updates
many updates are available.
Related information
•
Online car* (p. 488)
•
Downloading, updating and uninstalling apps
(p. 494)
•
Remote updates (p. 534)
This functionality will be gradually introduced in connection with the service workshops extending their services.
7

Data transmission between car and

workshop
The time required for a booked visit to a Volvo
workshop can be shortened by transmitting trou-
bleshooting data as soon as the car stops at the
workshop.
The data can be transmitted most conveniently
by selecting the option
when I arrive
Centre.
play.
.
Each time the car slows to a slow enough speed
it starts searching for a Wi-Fi network. If an
New
authorised Volvo network (at a workshop) is
found, a message is displayed or a pop-up win-
dow opens in the centre display. (This does not
apply when you connect manually, see the sec-
tion "Connecting to a workshop manually"
below).
shows how
7
Automatically connect
in settings view in the centre dis-
MAINTENANCE AND SERVICE
Connecting to a workshop
automatically
NOTE
To avoid the driver being disturbed by unwan-
ted connection inquiries (for example, if the
car is often parked in the neighbourhood of a
workshop with an authorised Volvo network),
the connection mode will change to manual if
the driver declines connection twice within a
period of 5 days.
Without driver confirmation
This option provides the most convenient way of
transmitting troubleshooting data. The car con-
nects without the need for the driver to confirm.
If the car stops at the workshop and is switched
off with the start knob, a message is shown at
the top in the centre display. The car will connect
automatically when the driver's door is opened
unless the driver presses the Cancel
button.
* Option/accessory, for more information, see Introduction.
message
}}
535