Volvo XC90 TWIN ENGINE Owner's Manual page 535

Sending vehicle data
You can send vehicle data at any time from your
car, e.g. if you book a workshop visit directly via
the My Volvo owner's portal, and will help your
workshop with better basic information.
The vehicle data sent is the last saved (last time
the car was running).
1. Open the Car status app from the app view
in the centre display.
2. Press the Appointments button.
3. Press the Send car data
button.
> A message that vehicle data are being
sent is shown at the top of the centre dis-
play. You can cancel data transmission by
tapping the X in the activity indicator.
The vehicle data are sent via your Internet
connection.
4 Applies to Sensus Navigation*.
Vehicle Identification Number.
6
See workshop information
1. Open the Car status app from the app view
in the centre display.
2. Press the Appointments button.
3. Press the Workshop information
> A pop-up window with information on your
dealer will open.
4. Call your dealer if you like, or tap on the
address or GPS coordinates to start naviga-
4
tion to your workshop .
Booking information and vehicle data
When you decide to book a service or send data
from your car, the booking information and vehi-
cle data will be sent via you Internet connection.
The vehicle data make it easier for your workshop
to plan your next visit.
The vehicle data consists of information in the
following areas:
•
service requirement
•
time since last service
MAINTENANCE AND SERVICE
•
function status
•
fluid levels
•
meter reading
•
the car's vehicle identification number (VIN
•
the car's software version
•
the car's diagnostics data.
Related information
•
Volvo ID (p. 23)
•
Online car* (p. 488)
button.
•
Car status (p. 530)
* Option/accessory, for more information, see Introduction.
6
)
533