Volvo XC90 TWIN ENGINE Owner's Manual page 236

LOADING AND STORAGE
||
Loading mode
From retracted position - grip the handle and
pull out the cover so it slides over the side
panels in the cargo area - pull to the end
position and guide the cargo cover's attach-
ment pins into the grooves in the side panels.
(If the cover is already in the full-cover posi-
tion - see the next point)
From full-cover position - grip the handle and
guide the cargo cover's attachment pins into
the grooves in the side panels and release.
> Retract the cover until it stops in the load-
ing position.
234
In the event that your hands are occupied:
In the extended full-cover position - lightly
push the handle part of the cargo cover
upward, e.g. with an elbow.
>
The cover retracts until it stops in the
loading position.
To return to full-cover position from loading posi-
tion:
1. Grip the handle and pull the cargo cover out
to the end position.
2. Release slightly and angle the handle by
means of a light downward pressure.
> The cover is then locked in the end posi-
tion.
IMPORTANT
Avoid loading objects on top of the cargo
cover in extended position.
WARNING
In a 7-seat car, never have the cargo cover fit-
ted when there are passengers in the rear
seats. This may lead to serious injury in the
event of a collision.
Retracting
1. From the full-cover position:
Lift up the handle and pull it backward to dis-
engage the cargo cover's attachment pins
and then release.
From loading position:
Grip the handle and pull out the cargo cover
in the grooves - pull to the full-cover position.
Lift up the handle and pull it backward to dis-
engage the attachment pins and then
release.
2. Retract the cover with its attachment pins
outside of the side panels until it stops in the
retracted position.
Removal
In retracted position:
1. Depress the button on one of the retracted
cargo cover's end pieces and lift out that
end.
In a 7-seat car - release the third seat row's
seatbelt locking tabs from the hooks above
the side panels.